BBV Tx40X Installation Manual page 11

Programming the Patrol delay (This function is only available for BBV coax):
The default delay is 30 seconds. To programme a different delay, first determine the time delay required from the table
below:
Preset Key 1 -
Preset Key 2 -
Preset Key 3 -
Preset Key 4 -
Preset Key 5 -
Preset Key 6 -
Preset Key 7 -
Preset Key 8 -
Programming a Patrol delay on Patrol 1:
Press and release the preset key that corresponds with the delay desired, then press and hold PROGRAM whilst pressing
ZOOM IN to set patrol 1 delay. For example, to set a delay of 12 seconds, press and release Preset Key 2, then press and
hold PROGRAM whilst turning the joystick to ZOOM IN.
Press & release
relevant Preset
key
Programming a Patrol delay on Patrol 2:
Press and release the preset key that corresponds with the delay desired, then press and hold PROGRAM whilst pressing
ZOOM OUT to set patrol 2 delay. For example, to set a delay of 84 seconds, press and release Preset Key 8, then press and
hold PROGRAM whilst turning the joystick to ZOOM OUT.
Press & release
relevant Preset
key
Tx40X manual V1.06 July 2015
Random switching from 0 to 100 seconds
12 Seconds switching
24 Seconds switching
36 Seconds switching
48 Seconds switching
60 Seconds switching
72 Seconds switching
84 Seconds switching
PROGRAM
PROGRAM
TWIST
and
CLOCKWISE to
ZOOM IN
TWIST ANTI
and
CLOCKWISE to
ZOOM OUT
11