Related Manuals for BBV Tx500
Summary of Contents for BBV Tx500
- Page 1 Telemetry Transmitter Installation Guide Models covered Tx500 Building Block Video Ltd., Unit 1, Avocet Way, Diplocks Industrial Estate, Hailsham, East Sussex, UK. Tel: +44 (0)1323 842727 Fax: +44 (0)1323 842728...
-
Page 2: Safety Precautions
TX 500. Servicing should only be carried out by suitably qualified persons. ENVIRONMENTAL CONDITIONS The TX500 is designed for inside use only and should be protected from moisture and extreme temperatures. Operating temperature range: -5 to + 40 degrees centigrade. -
Page 3: Basic Operation
NOTE. This feature is inoperative on cameras fitted with automatic iris lenses without an override facility. Focus control: The upper key is used to focus the lens on distant objects. The lower key is for focusing on objects in the foreground. Tx500 Telemetry Transmitter Installation Handbook Rev-02 3 of 8... - Page 4 RX400. For patrol operation hold down the patrol key and either camera key 1 for patrol 1 or camera key 2 for patrol 2. Releasing both keys activates the function. To cancel the function operate either of the pan left or pan right keys. Tx500 Telemetry Transmitter Installation Handbook Rev-02 4 of 8...
- Page 5 Camera 1 may be automatically sent to a preset position on an alarm activation. This feature displays camera 1 on the monitor and activates preset 2. Manual operation of either a pan or tilt key will override the function. Tx500 Telemetry Transmitter Installation Handbook Rev-02 5 of 8...
- Page 6 This function is only available on lenses equipped with a remote override facility. Tx500 Telemetry Transmitter Installation Handbook Rev-02 6 of 8...
- Page 7 3 = 48 seconds. 7 = 144 seconds. 4 = 72 seconds. 8 = 168 seconds. It is recommended that the longest practical delay period is selected to minimise wear on the mechanical components. Tx500 Telemetry Transmitter Installation Handbook Rev-02 7 of 8...
- Page 8 Operate the camera select key which corresponds to the number of cameras on the system. The system is now programmed and will return to normal operation. Menu option 8 Exit This command exits the programming mode and returns the system to normal operation. Tx500 Telemetry Transmitter Installation Handbook Rev-02 8 of 8...