Asus Motherboard DSBF-DE User Manual page 50

4. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Spacebar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
DSBF-DE Series Keyboard power setting
®
5. Intel 6321ESB SATA port S/W RAID setting
(3-pin RAID_SEL1) (DSBF-DE model only)
This jumper allows you to select the Serial ATA RAID configuration utility to
use when you create disk arrays. Both utilities are supported by the
®
Intel 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI
MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps
on pins 2-3 to use the Intel
DSBF-DE Series RAID setting
-0
KBPWR1
1 2
+5V
(Default)
®
Matrix Storage Manager (MSM).
RAID_SEL1
2
1
LSI
(Default)
2 3
+5VSB
3
2
Intel
Chapter 2: Hardware information