Asus Motherboard DSBF-DE User Manual page 160

The Select New Array Type screen apprears.
4.
Use the arrow keys to select Create IS Volume, then press <Enter>.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
5. The Create New Array screen shows the disks you can add to make up
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Create New Array -- SAS1068
Array Type:
Array Size(MB):
Slot Device Identifier RAID Hot Drive Pred Size
Num
0
1
2
3
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
5-46
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 8 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
SEAGATE ST373454SS
SEAGATE ST373454SS
SEAGATE ST373454SS
SEAGATE ST373454SS
F1/Shift+1 = Help
IS
102996
Disk Spr Status
0003 [Yes] [NO] ------- ----
0003 [NO] [NO] ------- ----
0003 [Yes] [NO] ------- ----
0003 [Yes] [NO] ------- ----
C = Create array
Fail (MB)
70007
70007
35003
35003
Chapter 5: RAID configuration