Asus Motherboard DSBF-DE User Manual page 155

6. The Create New Array screen shows the disks you can add to make up
the IM volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
You may also specify the Hot Spare disk here. Select the disk, then move the
cursor to the Hot Spr column, then press <+>, <->, or <Space>.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Create New Array -- SAS1068
Array Type:
Array Size(MB):
Slot Device Identifier RAID Hot Drive Pred Size
Num
0 SEAGATE ST373454SS
1 SEAGATE ST373454SS
2 SEAGATE ST373454SS
3 SEAGATE ST373454SS
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
ASUS DSBF-DE Series
IM
------
Disk
0003 [NO]
0003 [NO]
0003 [NO]
0003 [NO]
F1/Shift+1 = Help
Spr Status Fail
[NO] ------- ----
[NO] ------- ----
[NO] ------- ----
[NO] ------- ----
C = Create array
(MB)
70007
70007
35003
35003
5-41