Asus Motherboard DSBF-DE User Manual page 154

3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
The numbers of the channel depend on the controller.
4. The Adapter Properties screen appears.
Use the arrow keys to select RAID Properties, then press <Enter>.
5. The Select New Array Type screen apprears.
Use the arrow keys to select Create IM Volume, then press <Enter>.
5-40
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List Global Properties
Adapter PCI PCI PCI
BUS Dev Fnc
SAS1068 05 03 00
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Global Properties -/+ = Alter Boot Order
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVIDIA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
PCI FW Revision Status
Slot
00 1.15.00.00-IR Disabled
Ins/Del = Alter Boot List
SAS1068
00
05.03.00
1.15.00.00.IR
500E0180:60831008
25.02
Disabled
0
(Enabled OS only)
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 8 disks.
ALL DATA on array disks will be DELETED!
Boot
Order
0
Chapter 5: RAID configuration