Table of Contents
Advertisement
How to dry correctly
Selecting a different programme
As long as the cooling down phase or
the anti-crease phase has not been
reached, it is possible to change a
programme after it has started by turn-
ing the programme selector to a differ-
ent programme position.
Interrupting a programme
^ Switch the machine off with the I-On /
0-Off button.
To continue drying:
^ Switch the machine on with the I-On /
0-Off button.
With COTTONS and MINIMUM IRON
programmes the programme will con-
tinue unless the cooling down or
anti-crease phase has been reached.
With other programmes:
^ Press the START button.
Adding or removing items
^ Open the door. Take out or add items
as required.
^ To continue drying close the door
and press START.
To cancel a programme
^ Turn the programme selector to Fin-
ish or open the door .
The programme has been successfully
cancelled when only the
Anti-crease/Finish indicator lamp is on.
16
At the end of a programme
At the end of a programme the
Anti-crease/Finish lamp will come on in
the sequence display and the buzzer
will sound.
The drum will continue to rotate at inter-
vals to prevent laundry creasing, if you
do not wish to remove it immediately
(anti-crease). The anti-crease phase
lasts for a maximum of 60 minutes, ex-
cept with Woollens hand care
programme.
^ Press the Door button and open the
drum door.
^ Remove the laundry.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^ Clean the filter.
^ Close the door.
^ Switch the dryer off by pressing the
l-On/0-Off button.
Hide quick links:
Advertisement
Table of Contents
