Miele Novotronic T 220 Operating Instructions Manual page 21

Check and fault indicator lights:
Problem
The programme has
stopped, the
Anti-crease/Finish lamp
has come on in the se-
quence display and the
buzzer is sounding.
The programme has
been interrupted, the in-
dicator lamp for Hand
iron or Machine iron is
flashing, and the buzzer
sounds.
Possible cause
This is not a fault. The electronics register whether
there is laundry in the drum after the start of a COT-
TONS or MINIMUM IRON programme. If the drum is
empty the programme is stopped. The programme
will also be stopped if the laundry is dry when the
programme is started or if you are trying to dry an in-
dividual item. Use the Timed drying programme
(Warm air) to dry individual items.
There is no obvious
cause.
Problem solving guide
Remedy
– Switch off the dryer.
– Then switch the dryer
back on and start the
programme again.
If the programme stops
again and an indicator
lamp flashes, there is a
fault. Contact the Miele
Service Department.
21