Midland XT511 Owner's Manual page 11

Model XT511 Series
XT511 QUICK REFERENCE CHART
MENU
Channel Privacy
1~22
WX Alert CTCSS
WX Channel
DCS
On/Off
1~10
Minute Setting
Hour Setting
0~60
12hr AM/PM
Clock/Alarm Clock Function
CHANNEL SELECTION (GMRS/FRS BAND)
Turn the TUNING knob clockwise or counter-clockwise to select one of the
22 GMRS/FRS channels.
MONITOR
Pressing the MONITOR button will let you check activity on your current
channel before transmitting. This could also be used to adjust the volume
level of the radio when it is not receiving a signal.
Press the MONITOR button again to get out of MONITOR mode.
SCAN
Your XT511 Series can scan all 22 channels for any activity. To enter,
quickly press the SCAN button. Repeat the same procedure to exit. Your
radio will rapidly scan each of the 22 channels and stop on any active
channel. Your radio will stay on the active channel as long as the signal is
present and will resume scanning 5 seconds after the signal is no longer
present.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel.
To resume scanning, quickly press the button.
CALL ALERT
Your XT511 Series can transmit a call alert for a fixed length of time. To
send a call alert, press the CALL/LOCK button. The TX icon will appear
while transmitting a call alert and a tone can be heard on the speaker for
confirmation.
The XT511 has 5 call alert selections.
Page 11
Call Alert
VOX
Power
oF/1/2/3
H/L oF/1~5
oF~38
oF~83
Alarm Setting Minute Setting
0~60 0~60
Roger Beep
Silent Operation Dual Watch
On/Off On/Off
www.midlandradio.com
®
Privacy
1~22
CTCSS oF~38
oF~83
DCS
Only when Dual Watch is ON