1 or 2 Km. In open space but with obstructions like trees, leafs or houses the maximum possible range is about 2-4 Km. In open space, without obstructions and in sight, like for exam- ple in mountain, the coverage can be 6 Km. XT-30 instruction guide...
Page 4
Dispose of the batteries according to procedures set out by local regulations. ! Do not mix old and new batteries or batteries of different types or batteries which have been used in different manners. XT-30 instruction guide...
Description of the controls and functions MENU MENU MENU SCAN SCAN SCAN CALL CALL CALL MENU SCAN CALL MENU MENU MENU SCAN SCAN SCAN CALL CALL CALL XT-30 instruction guide MENU SCAN CALL...
Page 6
(supplied in the package). To open the battery compartment, hold the unit face down and slide the cover. Attention: The supplied batteries must be recharged before the first use (see the section “Recharge” for more info). XT-30 instruction guide...
Only PTT and /CALL will still be active. Repeat the same procedure to unlock the keypad. Sending an audio signal (CALL) By pressing quickly /CALL ,you will send an audio signal to other users on the same channel. XT-30 instruction guide...
This feature is enabled by default. To disable it: Press the Menu button till the display shows “rb” Select “oF” by means of the ▲/▼ buttons. Confirm your selection by pushing the PTT button. XT-30 instruction guide...
Page 9
Everytime you press any button, you will hear a beep sound. To deactivate it press Menu 5 times. Then select “oF” with the ▲/▼ controls and confirm your selection by pushing PTT. To enable the beep again, repeat the same procedure and select “ON”. XT-30 instruction guide...
Page 10
The icon blinks only if the radio is turned on. ATTENTION Alkaline batteries cannot be recharged. Do not recharge the radio without the rechargeable batteries. For the very first time, we recommend to recharge the radio for 10/12 hours. 10 | XT-30 instruction guide...
Page 11
The battery life may increase by up to 50 %. Accessories XT30 is provided with a MIC/SPK jack for the connection of external acces- sories such as mikes or headsets. This plug is 2-pin type and is compatible with all Midland accessories. XT-30 instruction guide | 11...
Page 12
• Keep pressed the ▲ button and turn on the radio at the same time. All the functions will be reset ex-factory. Before you go ahead with the reset, we recommend that you take note of all the settings you have carried out as they will be deleted. 12 | XT-30 instruction guide...
Specifications are subject to change without notice. ATTENTION Direct plug-in ac/dc power supply must be used for disconnecting the transceiver from the mains; the desktop charger must be positioned close to the unit and easily accessible. XT-30 instruction guide | 13...
Page 14
Importado por: ALAN COMMUNICATIONS, SA C/Cobalt, 48 - 08940 Cornellà de Llobregat (Barcelona - España) www.midland.es El uso de este equipo puede estar sujeto a la obtención de la correspondiente autorización administrativa. Lea atentamente las instrucciones antes de usar el equipo.