Asus Motherboard A8N-SLI Premium User Manual page 155

Creating a RAID 0+1 set (Mirrored+Striped)
To create a RAID 0+1 set:
1. From the Silicon Image
configuration utility
main menu, select
Create RAID set then
press <Enter>. The
following sub-menu
appears.
2. Select RAID 0+1 then
press <Enter> to
display the following.
3. Select your
desired method of
configuration.
Auto configuration
a. Select Auto
Configuration then press <Enter>.
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
c. Press <Y> to confirm or <N> to return to the Main Menu.
Auto-configuration creates a RAID 0+1 set without a backup copy of the
current source disk data.
Manual configuration
a. Select Manual
configuration and
press <Enter>. The
following pop-up
menu appears.
b. Use the up or down
arrow keys to
select achunk size
appropriate to your
drive usage then press <Enter>.
TIP: For server systems, use of a lower array block size is recommended.
For multimedia computer systems used mainly for audio and video
editing, a higher array block size is recommended for optimum
performance.
ASUS A8N-SLI Premium
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
MAIN MENU
Auto configuration
Manual configuration
MAIN MENU
Auto configuration
Manual configuration
RAID0 RAID0
RAID1 RAID1
RAID10 RAID5
SPARE DRIVE
RAID10
SPARE DRIVE
JBOD (Single)
chunk size
4K
8K
16K
32K
64K
128K
5-37