Hardware Monitor - Asus Motherboard A8N-SLI Premium User Manual

4.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press <Enter> to display
the configuration options.
Q-Fan Controller
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU FAN Speed
CHA1 FAN Speed
CHIP FAN Speed
x CPU Target Temperature
CPU Fan Speed warning
CPU Fan Speed warning
CHIP Fan Speed warning
F1:Help
ESC: Exit
Q-Fan Controller [Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, +12V Voltage, 3.3V Voltage, 5VCC
Voltage
The onboard hardware monitor automatically detects the voltage
output through the onboard voltage regulators. These items are not
user-configurable.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed
CHA1 Fan Speed
CHIP Fan Speed
The onboard hardware monitor automatically detects and displays the
Chassis, CPU, and Chip fan speeds in rotations per minute (RPM). If the fan
is not connected to the motherboard, the field shows 0. These items are
not user-configurable.
4-38
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Disabled]
1.50V
3.31V
4.94V
11.26V
48ºC
38ºC
4962 RPM
0 RPM
5443 RPM
20ºC
[1600 RPM]
[1200 RPM]
[Enabled]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup