Specifications - Panasonic WV-SW316L Installation Manual

Specifications

• Basic
Power source:
Power consumption:
Ambient operating temperature:
Ambient operating humidity:
IR LED irradiation distance:
Waterproof:
Monitor output (for adjusting
the angular field of view):
EXT I/O terminal cable:
Microphone/line input cable:
For microphone input:
For line input:
Audio output cable:
Dimensions:
Mass:
Finish:
* When using this product without turning the power off. (However, the temperature inside the camera
shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when the ambient temperature
is -30 °C {-22 °F} or higher. The auto focus function and motorized zoom are not available until the
heater unit of the camera raises the internal temperature of the camera.
SW316L SW316
12 V DC, PoE (IEEE802.3af compliant)
SW314
PoE (IEEE802.3af compliant)
SW316L SW316
12 V DC*: 850 mA, PoE 48 V: 200 mA (Class 0 device)
SW314
PoE 48 V: 70 mA (Class 0 device)
* FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS
2 POWER SUPPLY.
SW316L SW316
–40 °C to +50 °C {-40 °F to 122 °F}*
SW314
–10 °C to +50 °C {14 °F to 122 °F}
Less than 90 % (no condensation)
SW316L
15 m {49.21 feet}
Camera: IP66 (IEC60529)
* Only when installation work specified in this book is properly
performed and appropriate waterproof treatment is performed
VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jack
SW316
SW316L
ALARM IN, DAY/NIGHT IN, ALARM OUT, AUX OUT (x1 for each)
SW316L SW316
ø3.5 mm monaural mini jack
Input impedance: Approx. 2 kΩ
Applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Input level: Approx. –10 dBV
SW316L SW316
ø3.5 mm stereo mini jack (monaural output)
Output impedance: Approx. 600 Ω
Line level
94 (W) mm x 89 (H) mm x ø226 mm
{3-7/10 inches (W) x 3-1/2 inches (H) x ø8-7/8 inches}
(including projection of the base cover fixing screw)
SW316
SW316L
Approx. 1.4 kg {3.09 lbs}
SW314
Approx. 1.3 kg {2.87 lbs}
Main body: Aluminum die cast/resin, metallic silver coating
Front cover section clear part: Polycarbonate resin
43