Wireless Security - Nikon 1 J5 Reference Manual

Wireless Security

At default settings, wireless security is not enabled. Enable wire-
less security on the camera before connecting.
❚❚ Enabling Wireless Security
Follow the steps below to enable wireless security.
1 Select Wi-Fi connection type.
Select Wi-Fi connection type in the
Wi-Fi menu.
Enable encryption.
2
Select Authentication/encryption to
display encryption options. Highlight
WPA2-PSK-AES and press J to
enable wireless security. A password
will now be required when connect-
ing to the camera; the default pass-
word is "NIKON_J5" (the current
password can be viewed at any time
by selecting Current settings in the
Wi-Fi menu). To allow connection
without a password, select Open for
Authentication/encryption.
T
115