Introduction - Simrad AP70 Operator's Manual

1

Introduction

The front panel and keys
¼ *
No.
Introduction |
5
STBY AUTO NAV WORK
8 9 10 11
Available on AP80 control units only.
Key/Description
CMD/THRUSTER. A short press takes/requests command. A long press (3
1
seconds) activates/deactivates available thrusters
MENU. A short press displays the active steering mode's quick menu. A second
2
click displays the Settings menu
POWER/LIGHT. A short press displays the Light dialog. A long press (3 seconds)
3
turns the unit ON/OFF
ROTARY KNOB (Course wheel). Rotated for selecting menu item and adjusting
4
value, pressed to confirm a selection/entry.
For mode specific operation, refer to "The operational modes" on page 20.
PORT (Cancel). Exits menu/returns to previous menu level.
5
NFU
Activates steering when in
Changes set heading, set course and track offset to port.
STBD (Confirm). Confirms menu selection/enters next menu level.
6
NFU
Activates when in
Changes set heading, set course and track offset to starboard.
TURN. Displays the Turn dialog
7
STBY. Turns the autopilot to
8
AUTO. Activates Auto
9
NAV (AP70) / TRACK (AP80). Activates
10
WORK. Used for selecting work profile
11
12 USB port door
ALARM. Displays the Alarm listing dialog
13
14 USB connector
AP70/AP80 Operator Manual
1 2 3
CMD MENU
4
6

TURN
7
12* 13*
Standby
mode.
Standby
mode.
Standby
mode
NoDrift
and mode
Nav Track
or
14* 12*
steering mode
AP80 control units only
| 7