Advanced > Cloud Setting; Advanced > Ddns - TP-Link NC230 User Manual

 Max Clients: Set the maximum number of clients that are allowed to connect to the extended
network.
Click Save to save and enable the settings.
4.4.5 Advanced > Cloud Setting
Refer to 4.3.4 Basic > Cloud
4.4.6 Advanced > DDNS
If your camera is connected to xDSL modem or cable modem directly, you might need DDNS
(Dynamic Domain Name Server) on the camera to allow you and your friends have access to the
camera using domain name, in no need of remembering the IP address. However, if your camera
is behind a NAT router, you need to set DDNS on your router, in no need of setting this on the
camera. As to xDSL environment, most users will use dynamic IP addresses.
NC230
NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi
Setting.
26
HD Day/Night Wi-Fi Cloud Camera