Seat - BMW F 800 GS Rider's Manual

Adjust beam throw by tilting
4
the headlight slightly about its
horizontal axis.
64
Tighten screws 1 on left and
right.
Beam-throw basic setting
z
Slacken screws 1 on left and
right.
Tilt the headlight slightly
about its horizontal axis until
arrowhead 2 is pointing toward
marker 3.
Tighten screws 1 on left and
right.

Seat

Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key to the left in seat
lock 1 and hold it in this pos-
ition while pressing down the
front part of the seat.
Lift seat 2 at the front and re-
lease the key.
Pull the seat out from below
the two-way radio box.
Remove the seat and place
it, rubber buffers down, on a
clean surface.
Install the seat
Push the seat in below the
two-way radio box.