BMW F 800 GS Rider's Manual page 128

8
126
Roll the rear wheel as far
forward as possible and loop
chain 8 over the sprocket.
z
Seat left adjusting plate 7 in
the swinging arm and install
quick-release axle 6 in the
brake caliper and the rear
wheel.
Make sure that the axle fits
into the recess of the adjust-
ing plate.
Install right adjusting plate 5.
Install nut 2, but do not tighten
it at this point.
OE
without centre stand
Remove the auxiliary stand.
Insert the impulse sensor into
the bore and install screw 1.