BMW F 800 GS Rider's Manual page 123

ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Slip spacing bushing 5 onto
the left-hand side of the wheel
hub.
ATTENTION
Front wheel installed wrong
way round.
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads of the
brake caliper on the left.
Raise the front wheel and in-
sert axle 4 until seated.
Tighten right axle clamping
screws 1 to the specified tight-
ening torque or install a suit-
able tool to counter-hold for
the next step in the assembly
procedure.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
8
121
z