Fuel Mix (Air/Heli Only) - FUTABA 8FG SUPER Instruction Manual

FUEL MIX
This function is utilized to refine inflight needle
adjustments of engines that offer mixture control
carburetors.
● Select [FUEL MIX] at the Model menu
and access the setup screen shown
below by touching the RTN button.
● Select the function name
and return to the Model
menu by touching the
RTN button.
[Helicopter type]
86 <Model Menu (Common Functions)>
Dedicated mixing used to adjust the fuel mixture of applicable
engines. [Airplane/helicopter]
[Airplane type]
●Engine cut setting
Note: Initial settings does not assign fuel mix to
any channel. Prior to utilizing the Fuel Mix
settings, select an unused channel on your
receiver and assign it accordingly for the
mixture control. Additionally, please make
sure that your [Control] and [Trim] are set to
null [--].
<SensorTouch™>
●Needle high trim
selection
●Acceleration setting
●Mixing curve copy function
Move the COPY item and touch the RTN
button to switch to the data input mode.
Select the copy destination condition by
scrolling the touch sensor and touch the
RTN button. Select the [YES] and touch
the RTN button.
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
● To next page