Typical Installation - Rheem 310 Owner's Manual And Installation Instructions

TYPICAL INSTALLATION – MULTIPLE HEAT PUMP WATER HEATERS
MULTIPLE HEAT PUMP WATER HEATERS
INSTALLATION DIMENSIONS – MULTIPLE HEAT PUMP WATER HEATERS
In Line Manifold
Installation Layout Minimum Dimensions
Model A B C *
310 HAV 1545 645 900 900 2445 900 900 300 1670 1675
MULTIPLE HEAT PUMP WATER HEATERS INSTALLATION DIMENSIONS

TYPICAL INSTALLATION

Back to Back Manifold
D E F * G * H
Angle Manifold
Notes
1. A minimum clearance of 900 mm (C*, F* & G*)
should be left in front and at the sides of the
water heater for access, servicing and water
J K
heater removal.
2. Air flow through the heat pump must be parallel
to the adjacent heat pump water heater.
37
MULTIPLE INSTALLATIONS
TPR Valve Drain Line
Common Discharge
Point
LEGEND