Table of Contents
Advertisement
8 .
8 . 8 .
B I O S r e c o v e r y ( 3 - p i n R E C O V E R Y 1 )
B I O S r e c o v e r y ( 3 - p i n R E C O V E R Y 1 )
8 .
8 .
B I O S r e c o v e r y ( 3 - p i n R E C O V E R Y 1 )
B I O S r e c o v e r y ( 3 - p i n R E C O V E R Y 1 )
B I O S r e c o v e r y ( 3 - p i n R E C O V E R Y 1 )
This jumper allows you to recover your original BIOS from a floppy disk
in case the BIOS codes and data are corrupted.
To recover the BIOS:
1.
Turn OFF your computer and unplug the power cord.
2.
Move the jumper cap from pins 1-2 (default) to pins 2-3.
3.
Insert a floppy disk with the original or updated BIOS file.
4.
Plug the power cord and turn ON the computer.
5.
The system searches for the BIOS file in the floppy then
reflashes the BIOS.
6.
When finished, shut down your computer.
7.
Replace the jumper cap from pins 2-3 to pins 1-2.
8.
Reboot your computer.
9.
Hold down the < D e l >
BIOS setup to re-enter data.
®
LAN2
P5MT-M BIOS recovery setting
9 .
9 . 9 .
9 .
R A I D s e l e c t s e t t i n g ( 3 - p i n R A I D _ S E L 1 )
R A I D s e l e c t s e t t i n g ( 3 - p i n R A I D _ S E L 1 )
R A I D s e l e c t s e t t i n g ( 3 - p i n R A I D _ S E L 1 )
9 .
R A I D s e l e c t s e t t i n g ( 3 - p i n R A I D _ S E L 1 )
R A I D s e l e c t s e t t i n g ( 3 - p i n R A I D _ S E L 1 )
Set this jumper to 1-2 (Default) to enable LSI RAID ROM. Set this
jumper to 2-3 to enable Intel
®
LAN2
P5MT-M RAID select jumper
A S U S P 5 M T - M
A S U S P 5 M T - M
A S U S P 5 M T - M
A S U S P 5 M T - M
A S U S P 5 M T - M
< D e l > key during the boot process and enter
< D e l >
< D e l >
< D e l >
RECOVERY1
1 2
Normal
(Default)
®
RAID ROM.
RAID_SEL1
1 2
LSI RAID ROM
(Default)
2 3
BIOS recovery
2 3
INTEL RAID ROM
2 - 2 3
2 - 2 3
2 - 2 3
2 - 2 3
2 - 2 3
Advertisement
Table of Contents
