Asus Motherboard P5MT-M Product Manual page 102

Creating a RAID 0 set (striped) Creating a RAID 0 set (striped)
Creating a RAID 0 set (striped) Creating a RAID 0 set (striped) Creating a RAID 0 set (striped)
To create a RAID 0 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
↑↓ ↑↓]-Change ↑↓ ↑↓
[↑↓
2. Enter a name for the RAID 0 set, then press <Enter>.
3. When the R A I D L e v e l
key to select R A I D 0 ( S t r i p e )
4. When the D i s k s
disk drives to configure as RAID. This pop-up screen appears.
Port Drive Model
[↑↓
5. Use the up/down arrow key to highlight a drive, then press <Space>
to select. A small triangle marks the selected drive. Press <Enter>
after completing your selection.
5 - 4 5 - 4 5 - 4
5 - 4 5 - 4
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[TAB]-Next
R A I D L e v e l R A I D L e v e l
R A I D L e v e l item is highlighted, press the up/down arrow R A I D L e v e l
R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ), then press <Enter>. R A I D 0 ( S t r i p e )
R A I D 0 ( S t r i p e )
D i s k s D i s k s D i s k s D i s k s item is highlighted, press <Enter> to select the hard
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
2 XXXXXXXXXXXX
3 XXXXXXXXXXXX
Select 2 to 4 disks to use in creating the volume.
↑↓]-Previous/Next ↑↓ ↑↓
↑↓
[SPACE]-Selects
1 . C r e a t e R A I D V o l u m e, then 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
CREATE ARRAY MENU ]
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
]
[ESC]-Previous Menu
[ SELECT DISKS ]
Serial #
XXXXXXXX XX.XGB Non-RAID Disk
XXXXXXXX XX.XGB Non-RAID Disk
XXXXXXXX XX.XGB Non-RAID Disk
XXXXXXXX XX.XGB Non-RAID Disk
[ENTER]-Selection Complete
C h a p t e r 5 : Dr i v e r i n s t a l l a t i o n C h a p t e r 5 : D C h a p t e r 5 : D
C h a p t e r 5 : D C h a p t e r 5 : D
[Enter]-Select
Size Status
r i v e r i n s t a l l a t i o n r i v e r i n s t a l l a t i o n r i v e r i n s t a l l a t i o n
r i v e r i n s t a l l a t i o n