Asus Motherboard P5MT-M Product Manual page 130

Using the Objects command
To check data consistency using the O b j e c t s
1. From the Management Menu, select O b j e c t s
D r i v e D r i v e
D r i v e D r i v e from the menu. D r i v e
2. Use the arrow keys to select the logical drive you want to check, then
press <Enter>.
Check Consistency Check Consistency
3. Select Check Consistency Check Consistency from the pop-up menu, then press <Enter>. Check Consistency
4. When prompted, press <Y> to to check the drive.
5. When checking is complete, press any key to continue.
5 - 3 2 5 - 3 2 5 - 3 2
5 - 3 2 5 - 3 2
O b j e c t s command: O b j e c t s O b j e c t s
O b j e c t s
O b j e c t s, then select L o g i c a l O b j e c t s O b j e c t s
O b j e c t s
C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n
C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n
L o g i c a l L o g i c a l L o g i c a l
L o g i c a l