Advertisement
∙ Fit the steam tray and steaming grid. Lastly, fi t the lid.
General operation
First, select and assemble the required accessory parts. The individual cooking and mixing programmes can only be started once the
appliance has been correctly assembled and locked.
Inserting the plug
As soon as the appliance is connected to the mains, the display lights up and the appliance is ready for use.
Cooling fan
The cooling fan protects the motor against over-heating. After each cycle of use, it continues to run for about three minutes.
Timer
∙ The desired operating time is selected using the + or – buttons.
∙ Always set the operating time fi rst, followed by the cooker or mixer setting.
∙ For all cooker settings, it is necessary to select the required operating time, which is then shown on the display. If the timer is set
after the cooking time itself, it will take a few seconds longer for the appliance to start.
∙ The mixing times are adjusted individually. If no particular operating time has been selected, the appliance will run for only one
minute, with the display showing the time as it elapses.
Setting the timer
∙ Pressing the + button once will select the 1-minute minimum operating time. With each additional push, the operating time
increases in 30-second steps.
∙ Pressing the – button decreases the selected time in 30-second steps.
∙ To select an operating time of less than one minute, press the + button once, and then use the – button to adjust the time to the
exact second.
∙ Pressing and holding the + or – buttons allows you to select the desired time in fast mode.
Selector switch
∙ This selector switch allows you to choose the individual mixing and cooking programmes.
∙ The individual cooking programmes can be selected with the switch turned anti-clockwise.
∙ Turning the switch clockwise allows you to select the individual mixing programmes without the cooking function.
10
Advertisement
