Metra Electronics LEXUS 99-8151 Installation Instructions Manual page 8

LEXUS IS 300 2001-2005
ISO RADIO PROVISION WITH POCKET
5 Align and engage the (3) tabs on the
bottom of the climate controls to the
top edge of the radio housing/pocket
assembly. Secure the climate con-
trols to the assembly using the (4)
factory Phillips screws previously
removed from the climate controls.
6 Mount the ISO Brackets to the radio
with the screws supplied with the
radio. (Figure E)
Slide the radio into the radio housing
7
assembly until it snaps into place.
(Figure F)
Snap the ISO Trim-plate onto the
8
Radio Housing. (Figure G)
9 Continue with final assembly.
Note: To remove the radio from the
housing unclip and remove the ISO
trim-plate. Using a small blade
screw driver release the clips on the
ISO snap in brackets and slide the
radio out of the housing assembly.
99-8151
6
KIT ASSEMBL Y
E
F
G