Draw - Mackie DL806 Reference Manual

2X
The 2X button is located near the upper-right corner of the screen, just left of the draw button.
This allows you to zoom in on the graphic EQ, perfect for our friends with sausage fingers and/or
mixing with the iPad mini. Swipe left and right to view and adjust the remaining bands.
Press the 2X button to turn the 2X zoom function on or off. It will illuminate green when engaged
(as seen below) and is gray when disengaged (as seen on the previous page). Note that draw
(detailed below) is unavailable when in 2X mode (as seen below).

Draw

The draw button is located near the upper-right corner of the screen. This allows you to draw an
EQ curve over the display (regardless of where the slider balls currently reside) and the sliders will
snap to the corresponding position.
Engage draw to quickly create a basic GEQ outline, then disengage draw to fine-tune any of the
31 bands one-by-one, as needed.
Press the draw button to turn the draw function on or off. It will illuminate green when engaged
(as seen on the previous page) and is gray when disengaged. Note that draw is unavailable when
in 2X mode (as seen above).
Mackie DL806 and DL1608 Reference Guide
83