Mackie DL806 Reference Manual page 105

Repeat this step a couple more times. Go back to the mixer view and channel view to change the mixer
settings, and store these snapshots in the shows view as indicated above. At this point, the snapshot
list will look somewhat like the image below (depending upon the number of snapshots you took,
of course!).
Step 5 — Naming snapshots: You created a bunch of snapshots for your first show, but how do you
know what each one represents? By naming them, of course! Touching a snapshot button (other than
"0 - Default" or "Store Snapshot") will display a popover with the following options.
Tap inside of the blank "Name:" box to reveal the onscreen keyboard, then name the currently selected
snapshot as you so desire. Tap the "return" key when satisfied with the name. If the name is too long to
fit, the button scrolls, displaying the entire name.
Notice that the number remains, even once the snapshot has been named. This helps keep the
snapshots in order, regardless of name.
Mackie DL806 and DL1608 Reference Guide
105