Graphic Eq; Mute - Mackie DL806 Reference Manual

Once a different output has been selected, the channel faders will change to show the level going
to the newly selected output. Similarly, the master fader will change to show the controls of the newly
selected output.
Here, the mixer view acts like a window where you may view and change one output's mix at a time.
No matter which output is currently selected, the others are still there, as they were.
The thin illuminated strip underneath the master fader cap also helps indicate which output type is currently
selected; the color varies and is dependent on the selected output. This is the same indicator that is also on
display underneath the fader cap of each input fader. See below for the various colors that represent each
selected output, but know that there is no way you would ever see the image as shown below, as only one
output may be selected at any given time. The image is just a point of reference.
LR AUX 1

Graphic EQ

The master fader EQ displays the current graphic EQ settings. The graphic EQ display
illuminates green when engaged and is gray when disengaged.
Tapping the master fader's graphic EQ display will change the outlook from the mixer view
to the channel view for the currently selected output. As such, tapping the graphic EQ curve in the
channel view will change the outlook back to the mixer view. The graphic EQ is available with all
selected outputs, except reverb and delay.
To learn more about the graphic EQ, check out chapter 12 starting on page 82.

Mute

The master fader mute button works exactly like a channel mute, except it mutes the output.
Use it as a break switch to mute monitors (or even the main PA) when the band takes a break,
for example. The mute button is available when any output is selected.
The mute button illuminates red when engaged and is gray when disengaged.
The user may de-select Use LR Mute for a particular aux/FX send to control the aux mutes
(or FX mutes) and main mix mutes independently for each channel. More information about
Use LR Mute may be found on pages 48-49.
Outputs muted via group mutes will illuminate oxblood red. More information about mute
groups may be found on page 121-125.
AUX 2 AUX 3 AUX 4
Mackie DL806 and DL1608 Reference Guide
AUX 5 AUX 6
47
REV DLY