Scanning Information - Viessmann vitotronic 300-k Operating Instructions Manual

Scanning

Scanning Information

24
Subject to the components connected and the settings
made, you can scan current temperatures and operating
conditions.
Information in the main menu is split into groups:
H "General"
H "Burner"
H "Heating circuit 1"
H "Heating circuit 2"
H "Heating circuit 3"
H "DHW"
H "Solar energy"
H "Reset data"
H "Service address"
Note: If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is
displayed.
For detailed scanning options on individual groups
see chapter "Scanning options" (see page 32).
From the home screen tap the following buttons:
1. "Menu"
2. "Information"
3. Select the desired information group
Scanning the solar energy yield in conjunction with solar
thermal systems
Only in connection with solar control unit, type SM1.
There you can scan the solar energy yield in conjunction
with a Vitosolic solar control unit.
From the home screen tap the following buttons:
1. "Menu"
2. "Solar energy"
The solar energy yield is shown in diagrammatic form.
If you want to display the values in numerical form,
tap the respective day of the week.
Note: For further scanning options, e.g. for the
solar circuit pump hours run, see the extended
menu under "Information" in the "Solar" group.
Vitotronic 300-K Operating