Vitotronic 300-K Operating
Language Selection
Setting Measuring Units
Restoring Factory Settings
System setting
"Heating circuit 1", "Heating circuit 2" or "Heating circuit 3"
From the home screen tap the following buttons:
1. "Menu"
2. "Settings"
3. "Language"
4. Required language
5. Tap "OK" to confirm
From the home screen tap the following buttons:
1. "Menu"
2. "Settings"
3. "Measuring units"
4. "Metric" or "Imperial"
5. Tap "OK" to confirm
You can individually restore all modified values for each
heating circuit to their factory setting.
From the home screen tap the following buttons:
1. "Menu"
2. "Settings"
3. "Factory settings"
4. "Heating circuit 1", "Heating circuit 2" or "Heating
circuit 3" as the required heating circuit
5. Tap "OK" to confirm or
Settings and values that are reset
H Set room temperature
H Set reduced room temperature
H Operating program
H Set DHW temperature
H Time program for central heating
H Time program for DHW heating
H Time program for DHW circulation pump
H Heating curve slope and shift
H Comfort and energy saving functions are deleted.
Note: If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is
retained.
Further Adjustments
to cancel
23