Siemens Gigaset S100 User Manual page 98

Operating several handsets
Activating/deactivating the Walk and Talk mode
[______________________________________________]
Add. Features
[______________________________________________]
Walk and Talk
[RRRRRRRRRR]
Off
If you now press the talk key c or handsfree key d, the call is sent to all handsets that
are in Walk and Talk mode. The connection is made with the first handset that accepts
the Walk and Talk call.
N
N
i
N
N
Using the handset as a room monitor in Walk and Talk mode
You can still use the handset as a room monitor while in Walk and Talk mode.
à
[RRRRRRRRRRRRR]
[______________________________________________]
Room Monitor
[RRRRRRRRRRRRRRRRRRRRRR]
Save
The room monitor alarm call is sent to all handsets that are in Walk and Talk mode.
Before leaving, you should check the settings for the room monitor,
W
e.g. sensitivity and connection.
Press the display key
function. The handset returns to normal Walk and Talk mode.
94
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Deactivating Walk and Talk mode:
Press the display key.
The ring and signal tones can be set just like when your handset has
contact with the base station at home (page 96 and page 98).
"Activating/deactivating the ringer tone" (page 99) and "Activating/
deactivating keypad protection" (page 11) are both possible in Walk
and Talk mode.
To open the menu, press the display key ©.
Switching your handset off and on again does not affect the Walk and
Talk mode.
Open the menu.
Select the menu item and confirm.
OK
Scroll to the Room M.: line and activate the room
monitor function.
You can scroll to the Level: line if you want to set the
sensitivity for the noise level (Low or High).
Press the display key. The room monitor function is
now activated.
on the room monitor handset to deactivate the room monitor
Off