Attaching The Belt Clip; Activating/Deactivating The Handset; Activating/Deactivating Keypad Protection - Siemens Gigaset S100 User Manual

Attaching the belt clip

Push the belt clip onto the back of the handset until the side protrusions click into place.

Activating/deactivating the handset

To activate the handset hold down the end call key a. You will hear a confirmation
beep (rising tone sequence).
To deactivate the handset while in the idle state hold down the end call key a again
(confirmation beep).
Placing the handset in the base station or charging unit automatically
i
activates it.

Activating/deactivating keypad protection

You can disable the handset keys, e. g. when carrying it in your pocket or bag. This pro-
tects the keypad against inadvertent activation.
To deactivate hold down the hash key R again (confirmation beep).
The keypad protection is automatically deactivated when you receive
N
a call. After the call it is automatically activated again.
Emergency numbers cannot be dialled if the keypad protection has
N
i
been activated.
The keypad protection is still indicated if you have loaded a logo as
N
display graphic (page 61).
Hold down the hash key (confirmation beep).
The display shows the icon Ø.
Preparing the telephone
11