Connecting The Base Station To A Pabx; Dialling Mode And Flash Time - Siemens Gigaset S100 User Manual

Connecting the base station to a PABX

Connecting the base station to a PABX
The following settings are only necessary if your PABX requires it, please see your PABX
operating instructions.
You cannot send or receive text messages (SMS) if your PABX does not
i
support telephone number transmission.

Dialling mode and flash time

The current setting is marked with ‰
Step 1: Change the dialling mode
You can choose the following dialling modes:
Tone dialling (DTMF),
N
Dial pulsing (DP),
N
DTMF earth (country specific).
N
[______________________________________________]
Base Settings
[______________________________________________]
Add. Features
[______________________________________________]
Dialling Mode
OK
Step 2: Set the flash time
[______________________________________________]
Base Settings
[______________________________________________]
Add. Features
[______________________________________________]
Recall
OK
108
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Confirm.
OK
Select and confirm the dialling mode (marked
with ‰).
Hold down (return to idle).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select and confirm the flash time (marked with ‰).
Hold down (return to idle).