Table of Contents
Advertisement
Set the Size of the Frame
To set the size of the frame, first set the top left corner of the
frame (first point) and then the bottom right corner of the
frame (second point). The position of the frame is set later.
5
Use the arrow button to set the first point.
œ Use j and l to move the guidelines vertically.
œ Use d and c to move the guidelines horizontally.
œ Press and hold an arrow to move the guidelines quickly
in that direction.
6
Press the SET button.
œ The first point is set where the guidelines are located.
œ The guide for setting the second point appear.
œ To specify the first point anew, press the MODE button.
7
Use the arrow button to set the second point to
determine the size of the frame.
œ When setting the second point, if the
vertical-to-horizontal ratio of the frame nears 3:4, the
guidelines will turn green.
First point
Second point
First point
END POINT SETTING
First point location
Second point
English
104
Advertisement
Table of Contents
