Assemble the centre speaker:
Connect the speaker cable.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Push
Assemble the front speakers:
Attach the stand neck.
≥ The two front speakers are interchangeable.
≥ Keep the screws out of reach of children to prevent swallowing.
A Screw (supplied)
≥ Tighten securely.
Assemble the front speakers:
Connect the speaker cables.
*
45
* If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm from the tip, at an angle of approx. 45o (as illustrated above).
A Centre speaker
1 Insert the wire fully.
Green
Push
connector
r: White
s: Blue line
1 Insert the wire fully.
r: White
s: Blue line
≥ Insert the wire fully,
taking care not to insert
beyond the wire
insulation.
2 Press into the groove.
RQT9849
15