Panasonic SC-HTB770 Operating Instructions Manual page 12
Hide thumbs
Also See for SC-HTB770:
- Owner's manual (44 pages) ,
- Quick start manual (2 pages) ,
- Owner's manual (40 pages)
Table of Contents
Advertisement
Connect the speaker cables.
Push
1 Insert the wire fully.
r: White
s: Blue line
≥ Insert the wire fully, taking care not to insert
beyond the wire insulation.
2 Press into the groove.
* If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm from the tip, at an angle of approx. 45o (as illustrated above).
Drive a screw into the wall.
≥ Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at least 20 mm of space above and on each side of the speaker to allow enough space for fitting the speaker.
≥ Keep the screws out of reach of children to prevent swallowing.
Front view (semi-transparent image)
F 238 mm
J Wall mounting hole
12
RQT9849
Red
A Right speaker connector
B Centre speaker connector
C Left speaker connector
G 745 mm
White
Green
A At least 30 mm
B ‰4.0 mm
C ‰7.0 mm to ‰9.4 mm
D Wall or pillar
E 5.5 mm to 6.5 mm
H 248 mm
*
45
I 20 mm
Advertisement
Table of Contents
