NordicTrack NTL14010.0 1750 User Manual page 9

6. With the help of a second person, hold the con-
sole assembly near the Left Upright (89).
Connect the Upright Wire (84) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
7. Insert the wires into the Left Upright (89) as you
set the console assembly on the Left Upright
and the Right Upright (90). Be careful not to
pinch the Upright Wire (84).
Attach the console assembly with four 5/16" x
1 1/2" Bolts (5) and four 5/16" Star Washers
(10). Start all four Bolts, and then tighten
each of them.
6
Console
Wire
84
7
5
10
84
89
9
Console
Assembly
Console
84
Wire
Wire
Tie
89
Console
Assembly
5
10
90