Timer Operations; Setting The Timer - JVC UX-S77 Instructions Manual

Remote control
,
CLOCK/
TIMER

Timer Operations

Setting the Timer

Using Daily Timer, you can wake up with your favorite
music. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
STANDBY/
one of Daily Timers or Recording Timer at the same time.
ON
• To exit from the timer setting, press CLOCK/TIMER as
SET
required.
CANCEL
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
Timer initial settings when shipped from the factory:
• DAILY 1:ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2:ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3:ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)
• REC TMR:ON Time (8:00)/OFF Time (10:00)/
Source (TUNER FM 1)
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
CLOCK/
TIMER
Ex. When Daily Timer 1 setting mode is selected
• When the clock has not been adjusted, pressing
2
Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
1 Set the hour then minute for on-time.
2 Set the hour then minute for off-time.
Remote
ONLY
Daily 1 Timer Daily 2 Timer
DAILY 1 ON (Time) DAILY 2
Canceled
Clock setting
(see page 19)
1 2 3 4 5
CLOCK/TIMER makes the System enter the clock
setting mode.
Daily 3 Timer
ON (Time) DAILY 3 ON (Time)
ON (Time)
REC TMR
Recording Timer
1
SET
35