Charging The Batteries; Battery Level Indicator - Midland X-Talker ALR2 Series Instruction Manual

Table of Contents

Advertisement

Model ALR2 Series

CHARGING THE BATTERIES

Your radios are equipped for using 3 AAA rechargeable NiMH
batteries which can be recharged by inserting one end of the USB
Cable into a USB power source, and the other end into the radio USB
charging jack. While charging, the Battery Meter will flash from 1 to 3
bars. The LCD display will show FULL when charging is complete.
For maximum battery life, Midland recommends charging the battery
pack when the low battery icon comes on. Remove the radios from
the charger when the charging is finished.
In order to ensure that the batteries are fully charged, it is
recommended that the battery pack be charged for at least 12
hours with the radio turned OFF.
1. Do not attempt to charge alkaline batteries or any batteries
!
or battery packs other than the one indicated in the
manual. This may cause leakage and damage to the radio.
2. For long term storage of the radio, turn the radio OFF and
remove the batteries from the radio.

BATTERY LEVEL INDICATOR

Your radio has a BATTERY LEVEL METER
battery power level. The greater the number of bars visible, the
stronger the battery level. When the battery level is low, the Battery
Shell
batteries should be replaced or recharged if using rechargeable
batteries.
Page 6
icon and "bt Lo" will flash in the display indicating your
that shows the
midlandusa.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T10 seriesT30 series

Table of Contents