Use And Care; Troubleshooting Guide - Midland X-Talker ALR2 Series Instruction Manual

Model ALR2 Series

TROUBLESHOOTING GUIDE

PROBLEM
No Power
Cannot Receive
Messages
Radio is not responding
to button presses
Display is dim
Charging not
functioning

USE AND CARE

1. Use a soft damp cloth to clean the radio.
2. Do not use alcohol or cleaning solutions to clean the radio.
3. Do not immerse the radio in water.
4. Dry the radio with a dry lint-free cloth should it get wet.
5. Turn off the radio and remove the batteries during long-term
storage.
If you have a problem which you believe requires
service, please call first and speak with a service
technician at 816-241-8500. Many problems can be
remedied over the phone without returning the unit for
service.
Page 13
SOLUTION
- Check battery installation and/or replace batteries.
- Confirm the radios have the same channel
settings.
- Make sure that you are within range of the other
transceivers.
- Buildings and other structures may interfere with
your communication.
- Make sure key lock is not on (See Keypad Lock,
Page 9).
- Radio might need to be reset. Turn radio off then
on.
- Recharge or replace batteries.
- Ensure the USB Jack where the USB Cable is
plugged in is functioning properly.
- Check that the batteries are installed in the radio
properly.
midlandusa.com