Table of Contents
Advertisement
Control Buttons & Indicators
Use
to:
Monitor Channel
Activity
Use
to:
- Talk on the Radio
- Send a Call Tone
- Save a setting
Use
to:
- Scan for active
channels
- Lock the key pad
Speaker
LCD Display
Low Battery level Indicator
VOX Icon
Transmit (TX) Icon
Channel Indicator
Receive (RX) Icon
Installing Batteries
Your G-300 radio operates with either 4 AAA Alkaline Batteries or optional NiMH
battery Pack. The belt clip should be removed (Page 18) to ease installation or
removal. To install the batteries:
1. With the back of the radio facing you, remove the Battery Cover by sliding it down
from the unit.
2. Insert 4 AAA batteries observing the polarity as shown. Installing the batteries
incorrectly will prevent the unit from operating or can damage the unit.
3. Return the Battery Cover by sliding it up from the unit.
Note: Batteries are not included
Charging the batteries
Your G-300 is equipped to allow using a rechargeable NiMH battery pack (not included) which
can be recharged by an A/C Charger/Adaptor (not included) through the MIC Jack of the radio,
or using a Desktop Charger (not included). Batteries must be charged when the low battery icon
flashes on the display. Do not charge alkaline batteries of any kind in the unit.
Use
to:
- Turn On/Off the Radio
- Enter/Exit the menu
Ext. Spk/Mic
Use
to:
- Increase the volume
- Scroll through the menu
Use
to:
- Decrease the Volume
- Scroll through the menu
Microphone
Key Pad Lock Icon
Vibrate Mode Icon
(G-227 ONLY)
CTCSS Channel Indicator
Power Hi/Lo Indicator
Advertisement
Table of Contents
