Stacked Iso Mount Units Provision - Metra Electronics 95-8210 Installation Instructions Manual

STACKED ISO UNITS PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1 Snap the factory brackets to the side
of the radio. (Figure A)
2 Snap the Double DIN brackets to the
outside edge of the Double DIN trim
plate. (Figure B)
3 Slide the stacked ISO mount units into
the bracket/trim plate assembly and
secure the units to the assembly
using the screws supplied with the
units. (Figure C)
Continue to final assembly.
95-8210 KIT ASSEMBL Y
4
A
B
C