Chevrolet 2007 TrailBlazer Owner's Manua page 490

7. Make sure the tire is stored securely. Push,
pull (A), and then try to turn (B) the tire.
If the tire moves, use the wheel wrench
and socket end of the extension to tighten
the cable.
8. Return the equipment to the proper location in
the vehicle as shown next.
490
A. Handle
B. Wheel Wrench
C. Instruction Label
1. Attach the handle (A), wheel wrench (B), and
extension (D) in the slots provided.
2. Roll up the instruction label (C) and return to
the slot in the tool kit.
3. Assemble the wheel blocks (F) to the jack.
4. Turn the knob (E) on the jack clockwise
to raise the jack head.
5. Return the rear seat to its proper position.
D. Extension(s)
E. Knob
F. Wheel Blocks and Jack