Chevrolet 2007 TrailBlazer Owner's Manua page 286

Stereo RCA Jacks
The RCA jacks are located behind the video
screen. The RCA jacks allow audio and video
signals to be connected from an auxiliary device
such as a camcorder or a video game unit to
the RSE system. Standard RCA cables, not
included, are needed to connect the auxiliary
device to the RCA jacks. The yellow connector
inputs video and the red and white connectors
input right and left audio. Refer to the
manufacturer's instructions for proper
connection of the auxiliary device.
To use the auxiliary inputs on the RSE system,
connect an external auxiliary device to the
color-coded RCA jacks and turn both the
auxiliary device and the RSE system power on.
If the RSE system had been previously in the
DVD player mode, pressing the SRCE button
on the faceplate or the remote control switches
the RSE system between the auxiliary device
and the DVD player.
286
How to Change the Video Format when
in the Auxiliary Mode
The auxiliary input video format is preset to NTSC.
In some countries, the video format may be in
the PAL system. To change the video format,
perform the following:
z
1. Press the display menu button.
q
2. Press the down
highlight the Video Format option.
r
3. Press the button to select Video Format.
p
4. Press the left or right
arrows to select the desired video format.
r
5. Press the button to accept the change.
Audio Output
Audio from the DVD player or auxiliary inputs can
be heard through the following possible sources:
•
Wireless Headphones
•
Vehicle Speakers
•
Vehicle wired headphone jacks on the
Rear Seat Audio system (if equipped)
navigation arrow to
o
navigation