Specifications Of Wireless Lan - Fujitsu ScanSnap IX500 Operating Instructions Manual

Specifications of Wireless LAN

The following table summarizes the wireless LAN specifications of the ScanSnap.
Item
Model name
Observed standards
Frequency range
Channels
Transfer speed (standard)
Communication mode
Communication distance (line
of sight)
Security
Easy installation
*1: The values indicated on these standards are the maximum value, and do not indicate actual
communication speed.
*2: To use the wireless function, you need a wireless access point that supports the same
standards.
*3: The specifications may vary based on the connected wireless access point and the surrounding
environment.
*4: You need a wireless access point that supports the WPS function.
Specification
iX500
IEEE802.11b/IEEE802.11g/IEEE802.11n
2.412 GHz to 2.472 GHz
1 to 13 ch
IEEE802.11b Max.: 11 Mbps
IEEE802.11g Max.: 54 Mbps
IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz bandwidth) (*1)
Infrastructure mode (*2)
Indoors, 50 m (Recommended: indoors, within 25 m) (*3)
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA (TKIP/AES), WPA2
(TKIP/AES), WEP (64-bit/128-bit)
WPS 2.0 supported (button/PIN code) (*4)
139
Specifications of Wireless LAN