How To Display Point, Event Mark Information - Furuno TZTL12F Operator's Manual

4. POINTS, EVENT MARKS
4.2.2 How to enter an event mark
Method 1: Function gesture
This function is available by touch con-
trol when you tap [Event] in [Settings] -
[General] - [Function Gesture] (see
section 1.15).
1. Tap the screen with two fingers to
show the [Creating Events] pop-up
menu.
2. Tap required event mark.
The following occurs.
• The selected mark is put at the own ship position, on the plotter, radar and sounder
displays, at the moment the mark was selected.
• The event mark is saved to the points list.
Method 2: Slide-out menu
Open the slide-out menu, then tap [Event]. Tap required event mark in the [Creating
Events] pop-up menu.
4.3

How to Display Point, Event Mark Information

Tap a point or event mark to display its information. The information shown depends
on the display in use and the object tapped.
Point, event mark information
(Plotter and radar displays)
4-2
Event mark information
(Sounder display)