Table of Contents
Advertisement
3. Turn the bulb socket counterclockwise to remove it
from the headlamp assembly and pull it
straight out.
4. Unplug the electrical connector from the old bulb
by releasing the clips on the bulb socket.
5. Pull the old bulb straight out.
6. Push the new bulb straight in until it clicks to
secure it.
7. Plug in the electrical connector to the new bulb
socket.
8. Push the bulb socket straight in and turn it
clockwise to secure it in the headlamp assembly.
Front Turn Signal, Parking and
Daytime Running Lamps (DRL)
To replace one of these bulbs:
1. Open the hood. See Hood Release on page 6 11.
2. Reach in to access either one of the bulb sockets
in the engine compartment.
3. Turn the bulb socket counterclockwise and remove
it from the lamp assembly.
I n f o r ma t i o n P r o v i d e d b y :
6-49
Advertisement
Chapters
Table of Contents
