Table of Contents
Advertisement
1. VOICE COMMAND SYSTEM OPERATION
MICROPHONE
It is unnecessary to speak directly into
the microphone when giving a com-
mand.
INFORMATION
Wait for the confirmation beep before
●
speaking a command.
Voice commands may not be recognized
●
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice com-
mands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
In the following conditions, the system
●
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.
310
VOICE COMMAND
EXAMPLE: SEARCHING FOR
A ROUTE TO YOUR HOME
1
Press the talk switch.
2
Say "Go home".
A confirmation screen will be displayed
showing the recognition results.
3
Say "Yes" or select "Yes".
The system starts searching for a route to
your home.
When the voice command is recognized,
the map of the area around the home
address will be displayed and route guid-
ance to the home address will begin.
If a home address is not registered, voice
guidance will say "Your home is not set.
Please try again after setting a home
location." and you will be prompted to
enter a home address. (See page 109.)
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
