Table of Contents
Advertisement
TONE SIGNAL
If a continuous tone signal is registered
in a phonebook, this screen appears. (If
not registered, "Send" and "Clear" are
not displayed.) This can be operated
while driving.
1
Confirm the number displayed on the
screen and select "Send". The number
before marked sign will be sent.
When "Clear" is selected, this function is
finished and the normal tone screen
appears.
To hang up the phone: Select
press the
switch on the steering
wheel.
INFORMATION
The continuous tone signal is the marked
●
sign (p or w) and the number that follows
the
phone
056133w0123p#1Û)
When the "p" pause tone is used, after
●
waiting 2 seconds the tone data up until
the next pause tone will be automatically
sent. When the "w" pause tone is used,
the tone data up until the next pause tone
will be automatically sent after user oper-
ation.
This operation can be done when it is
●
desirable to operate an answering
machine or use a telephone service in a
bank for example. The phone number
and the code number in the phonebook
can be registered.
BY VOICE RECOGNITION
"Send Tones" can be operated by giving
a command during a call.
or
The operating procedure is similar to
other voice recognition operations. (For
the operation of voice recognition, see
"VOICE COMMAND SYSTEM" on
page 308.)
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
I n f o r ma t i o n P r o v i d e d b y :
1. PHONE OPERATION
number.
(e.g.
4
167
Advertisement
Table of Contents
